1. Install the C-0934 Mounting Bracket into the Coin Vault. Use C-1059 to secure to Coin Vault.

1. Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-0122 Spade Taps provided.
2. Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.
3. Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

1. Connect the C-0126-MLV Machine Start Harness to the Machine Control Assembly RS-232 port.
2. Connect the C-5359 Machine Start Harness to the Machine Control Assembly Input 1 port.

1. Feed remaining harness ends through mounting hole as described in FasCard Mounting Guide.
2. Connect the free end of the C-0126-MLV Machine Start Harness to port 1 (Serial Connection Port) as shown in the image above.
3. Connect the free end of the C-5359 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
4. Connect the free end of the C-5500 Power Extension Harness to port 4 (C-5500 Power Harness Connection Port) as shown in the image above.
5. Connect FasCard reader to C-0934 Mounting Bracket using the C-0141 screws.
6. Program the card reader address as described here: How to Program Address on a FasCard Reader.

Associated Equipment Models