1. Run the C-5500 Power Adapter Harness and the C-5341 Machine Start Harness through the circular opening on the C-6936 Vault Mount Bracket.
2. Spread the bracket wings to lock it into place once installed.
3. Insert the C-6936 Vault Mount Bracket into the Coin Vault
4. Run the C-5500 Power Adapter Harness and the C-5341 Machine Start Harness through the circular opening on the C-5414 F2 Mounting Bracket.
5. Use the C-0144 screws, attach the C-5414 F2 Mounting Bracket to the C-6936 Vault Mount Bracket.

1. Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.
2. Connect the C-5336 Power Adapter Harness to the installed spade taps- Blue to Black and Brown to Red. Secure the green ground terminal under the bolt on top of the washer drum.
3. Connect the opposite end of the C-5336 Power Adapter Harness to the C-5602 Power Converter.
4. Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

1. Connect the C-5341 Machine Start Harness to the Terminal Strip in the same position that was previously connected to the Coin Drop.
   1. Wire orientation is not relevant.

1. Feed remaining harness ends through mounting hole as described in F2 Reader Mounting Guide.
2. Connect the free end of the C-5341 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
3. Connect the C-5500 Power Extension Harness to port 1 (C-5500 Power Harness Connection Port) as shown above.
4. Connect FasCard reader to base as described in the F2 Reader Mounting Guide.
5. Program the card reader address as described here: How to Program Address on a FasCard Reader.

Associated Equipment Models

Additional Information

• FasCard Admin Site - Equipment Setup
• FasCard Admin Site - Machine Setup
• FasCard Admin Site - Pricing & Features Schedule