Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: CCIGEN-1095 (w/ input from Bussman)

...

Table Excerpt
namexch-spec
Note
titleNote
  • Check local ADA requirements before mounting.
  • X-Changer has both front and rear doors. It is highly recommended to install with access to both for maintenance purposes.


Width (A)

Height (B)

Depth (C)

27 7/8"

25 1/8"

21 1/4"

Electrical Requirements: 120/60/1 Isolated Circuit

Gross Weight: ~190 lbs (with equipment installed)

Shipping Weight: ~240 lbs

Suggested mounting height: 39" from bottom of cabinet to floor

Hinge Location and Operation: Front and rear doors are hinged on side labeled 'C', above (left when facing front door / touchscreen, right when facing rear door).  Door  Door operation requires 2.5" additional space beyond width of cabinet to open fully. 

Image Added

Image Added

Image Added

Image Added

Image Added

Cable Feed: X-Changer cabling is fed through a cutout on the bottom-rear of the X-Changer near the hinge on side labeled 'C'.

Image Added