| Panel |
|---|
Step 1 - Install Mounting Bracket |
| Bw part list |
|---|
| Parts | C-5700-Temp,C-5800 |
|---|
| SizingMode | Height |
|---|
| ShowDesc2 | false |
|---|
| ShowDesc3 | false |
|---|
| SingleRow | true |
|---|
|
- Place the C-5700-TEMP Drill Template on the desired mounting location.
- Verify included harnesses will reach desired location without encountering interference from internal machine components.
- Refer to FasCard Mounting Guide for further instructions.
| Panel |
|---|
Step 2 - Connect Power |
| Bw part list |
|---|
| Parts | C-0122,C-5336,C-5500,C-5602 |
|---|
| SizingMode | Height |
|---|
| ShowDesc2 | false |
|---|
| ShowDesc3 | false |
|---|
| SingleRow | true |
|---|
|
- Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-0122 Spade Taps provided.
- Connect the C-5336 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.
- Secure the ground wire beneath a chassis screw.
- Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.
| Panel |
|---|
Step 3 - Connect the Combination Coin Sense Harness/Machine Start Harness |
| Bw part list |
|---|
| Parts | c-5330 |
|---|
| SizingMode | Height |
|---|
| ShowDesc2 | false |
|---|
| ShowDesc3 | false |
|---|
| SingleRow | true |
|---|
|
- Disconnect the Coin Drop from the Machine Control Assembly.
- Connect the C-5330 Combination Harness white connector to the harness connected to the Coin Drop.
- Connect the C-5330 Combination Harness red connector to the Machine Control Assembly where the Coin Drop was previously connected.
- Connect the remaining connector to the Coin Input connection on the Machine Control Assembly.
| Panel |
|---|
Step 5 4 - Connect and Mount FasCard Reader |
| Bw part list |
|---|
| Parts | C-5330,C-5500 |
|---|
| SizingMode | Height |
|---|
| ShowDesc2 | false |
|---|
| ShowDesc3 | false |
|---|
| SingleRow | true |
|---|
|
| Multiexcerpt include |
|---|
| MultiExcerptName | Reader ports |
|---|
| PageWithExcerpt | CCIDOC:_FC Reader Installation |
|---|
|
- Feed remaining harness ends through mounting hole as described in FasCard Mounting Guide ARC.
- Connect the free white connector of the C-5330 Combination Harness to port 2 (Pulse Connection Port) as shown in the image above.
- Connect the free black connector of the C-5330 Combination Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.
- Connect the free end of the C-5500 Power Extension Harness to port 4 (C-5500 Power Harness Connection Port) as shown in the image above.
- Connect FasCard reader to base as described in the FasCard Mounting Guide.
- Program the card reader address as described here: How to Program Address on a FasCard Reader.
|