Skip to end of metadata
Go to start of metadata

On this Page

Overview

Card reader programming varies depending upon card reader model.  Select the appropriate tab below, based upon card reader model number.

Programming Instructions

Items Needed

Program Card (C-2PROGRAM)Card Reader (C-0101, C-0102, C-0103)

Programming Steps

  1. Identify desired unit address for card reader.
  2. Power cycle card reader.
  3. Insert Program card, reader will display:
    Set Address: 0**
    Dip Card to Set
  4. To increase current digit: Insert tip of card and remove quickly.
  5. To move to next digit: Insert card fully and wait (approx 2 seconds).
  6. After accepting last digit of unit address, reader will display:
    Storing Value
    Remove Card Now

Video Tutorial