F2: FasCard Touchscreen Reader

Overview

This page is intended to provide the user with an overview of the features and functions of the F2 FasCard Reader.

On this Page

Features and Functions

The F2 FasCard reader is the second generation of FasCard readers and includes the features detailed below.

Full-Color Touchscreen

An improvement over the button pad selection method of the F1 reader, the F2 reader features a full-color touchscreen, as shown below.

Full Color Touchscreen

Modular Hardware

The F2 reader features a modular approach to hardware, allowing for easy replacement of individual components in the field.  Instructions for replacing modular components may be found in the F2: FasCard Reader Field Replaceable Components Guide.  

Dual Coin Input

The F2 reader utilizes dual coin inputs, allowing two individual coin drops to be used with one reader.  Coin drops may be independently configured to recognize one coin denomination per drop.  More information on the coin input modes may be found on the FasCard Admin Site - Equipment Setup page.  The location of the coin inputs is shown here.

LED Status Lights

The F2 reader utilizes a row of internal LED lights that illuminate in different colors and patterns to indicate reader/machine status changes.  A list of the colors and patterns is included below, as well as some example images.

LED Color

Status Description

Animation Description

Blue

Machine is idle or ready to accept payment

Blue light begins at the top of the light bar and gradually illuminates downward until bar is completely blue, then repeats.

Green Blinking

Payment transaction occurring

Green light blinks when payment transaction is occurring.

Multi Color Blinking

Pressing Start-Machine is activated

Multi-color blinking begins when Start button is pressed.

Green

Machine is in use / running

Green light begins at top of light bar and gradually illuminates downward, then darkens from bottom to top and repeats.

Yellow

Machine is almost finished

Yellow light pulses along entire length of the light bar.

Red

Machine is out of service

Red light along length of bar, no animation.

Red Blinking

Machine is disabled

Red light blinks along the entire length of the light bar.

Integrated NFC Hardware

Please note that NFC hardware is present but utilization of this feature is firmware dependent and may not necessarily be immediately available for all systems.

The F2 FasCard reader integrates near-field communication (NFC) capable hardware to allow laundry customers to pay via smartphone or smartcard.  

LED Color

Status Description

Animation Description

Green

Customer Swipes Card or holds phone for NFC payment

Green light begins at top of light bar and blinks while completing transaction.

Integrated Power Converter

The F2 FasCard reader can accept both 12vdc and 24vac power natively and does not require the C-5602 power converter when these options are available. 110/220vac applications require the C-5602 power converter.

Internal Connections

Item No.

Component

Notes

1

Power Connection Port

Utilizes the same power harnesses as the first generation FasCard reader.

2

Pulse Connection Port

Connection point for pulse machine start harnesses.

3

Coin 1 Connection Port

This is the connection point for the harness input associated with Coin 1.

4

Coin 2 Connection Port

This is the connection point for the harness input associated with Coin 2.

5

Serial Connection Port

This is the connection point for serial machine start harnesses.

6

Mag-Stripe Reader Connection Port

This is the connection point for the field-replaceable magnetic stripe reader.

7

C-5430 Mag-Stripe Reader

This is the magnetic stripe reader handling all card interactions with the F2 reader.

8

Touchscreen Graphic Connection

This connects to the LCD touchscreen and transmits display data.

9

Touchscreen Input Connection

This connects to the LCD touchscreen and transmits user input (touch) data.

10

Stack Add-on Pulse Port

Secondary port for pulse machine start harnesses. Requires C-6400.

11

Stack Add-on Serial Port

Secondary port for serial machine start harnesses. Requires C-6401.

Additional Information